ICON’s MQA system “Materials Quality Assurance” has been implemented to ensure that all raw materials used in sandwich panel’s fabrication conform to the preset material specifications and that our suppliers are qualified to provide these materials with full compliance with that specification.
Moreover, a restricted “Quality Control System” is well established and implemented to check all material parameters compliance upon arrival and before releasing to production.
Quality Inspection takes place through our well-equipped laboratory and by qualified Quality Team that consequently impacted on the quality standard of our sandwich panel.
According to the FPC “Materials Quality Assurance” inspections, tests are performed in our laboratory and External Accredited laboratories for polyurethane sandwich panel in accordance to EN standards.
Tensile strength determined according to EN 1607
Compressive strength determined according to EN 826
Shear strength determined according to EN 14509
According to the factory process control, polyurethane density is tested with respect to EN 14509 standards.
|Sandwich panel density|
|Foam density||40(±2) kg / m3||EN 1602|
ICON is controlling dimensional tolerances as prescribed in EN 14509 FPC.
|Dimensional tolerances of Icon Sandwich panel|
|Lenght||Width||Thickness||Deviation from Squarness||Deviation from Straightness|
|(±5) mm||(±2)mm||(±2)%(min.2mm)||Max. 6mm||(Max. 5mm)|